Cast in loop
The cast in loop is a low-cost lifting system that is commonly utilized in utility applications. Each loop is held in place by a swage clamp, which is labeled with the Safe Working Tensile Load Rating and the manufacturer.
It is located on the open side of the mould in the concrete element. The thimble is within the mold.
The marker must be visible after the concrete has been placed.
Hoisting hooks of the proper size can be put directly into the protruding cast-in loop. When storing the prefabricated element, take care not to kink the cables.
SPECIFICATIONS
Code Load Cl/Ton Load Cl/lbs H(mm) ΦD(mm) B(mm) CT-BSA-0.8 0.8T 1600 200 6 90 CT-BSA-1.2 1.2T 2400 225 7 95 CT-BSA-1.6 1.6T 3200 245 8 125 CT-BSA-2.0 2.0T 4000 295 9 130 CT-BSA-2.5 2.5T 5000 320 10 135 CT-BSA-4.0 4.0T 7600 365 12 160 CT-BSA-5.2 5.2T 10000 375 14 175 CT-BSA-6.3 6.3T 12600 420 16 230 CT-BSA-8.0 8.0T 16000 475 18 230 CTBSA-10.0 10.0T 19800 530 20 255 CT-BSA-12.5 12.5T 24000 585 22 275 CT-BSA-16.0 16.0T 32000 665 26 320 CT-BSA-20.0 20.0T 36000 745 28 375 CT-BSA-25.0 25.0T 50000 845 32 395
